Type | Return line filter |
---|---|
Application | The TRF-A is installed on the return line of the reservoir tank just before the reservoir tank to prevent contaminants from entering the tank. |
Features |
・By using CFD(fluid numerical analysis), achieved low pressure drop and large flow rate. ・Installed directly on top of a tank. ・Newly added set element for high flow type. ・Pressure gage or pressure switch is available in additional option. |
Item | Standard Spec. | Option |
---|---|---|
Corresponding fluid | Mineral oil | Phosphate ester oil, water glycol oil |
Maximum working pressure | 0-1MPa | - |
Indicator | n/a | Select from Pressure gage, pressure switch |
Relief valve (Bypass) | n/a | Installation optional |
Connection | Rc threaded type | Can be modified with an optional weld flange type |
Magnet | n/a | - |
Code | Fluid type |
- | Mineral oil |
F | Phosphate ester oil |
G | Water glycol oil |
Code | Inner diameter |
06A | Rc3/4 (20A) |
08A | Rc1 (25A) |
10A | Rc1-1/4 (32A) |
12A | Rc1-1/2 (40A) |
Code | Filtration |
C-Fiber | |
3C | 3μm |
8C | 8μm |
25C | 25μm |
Paper (High flow) | |
10UF*2 | 10μm |
20UF*2 | 20μm |
Paper | |
10U | 10μm |
20U*2 | 20μm |
40U*2 | 40μm |
Wire gauze | |
5UW | 5μm |
10UW | 10μm |
20UW | 20μm |
40UW | 40μm |
50UW | 50μm |
200W | 200Mesh |
150W | 150Mesh |
100W | 100Mesh |
60W | 60Mesh |
(1) | Indicator | |
- | Plug | |
I | Pressure gauge | |
E | Pressure switch | |
(2) | Relief valve (Bypass) | |
K | n/a | |
V | Attached | |
(3) | Companion flange | |
- | n/a | |
N | Attached |
Code | Fluid type |
- | Mineral oil |
F | Phosphate ester oil |
G | Water glycol oil |
Code | Inner diameter |
06A | Rc3/4 (20A) |
08A | Rc1 (25A) |
10A | Rc1-1/4 (32A) |
12A | Rc1-1/2 (40A) |
Code | Filtration |
C-Fiber | |
3C | 3μm |
8C | 8μm |
25C | 25μm |
Paper (High flow) | |
10UF*2 | 10μm |
20UF*2 | 20μm |
Paper | |
10U | 10μm |
20U*2 | 20μm |
40U*2 | 40μm |
Wire gauze | |
5UW | 5μm |
10UW | 10μm |
20UW | 20μm |
40UW | 40μm |
50UW | 50μm |
200W | 200Mesh |
150W | 150Mesh |
100W | 100Mesh |
60W | 60Mesh |
Code | Sealing parts set |
SP |
For element replacement |
SA | For overhaul |
Code | Fluid type |
- | Mineral oil |
F | Phosphate ester oil |
G | Water glycol oil |
Code | Inner diameter |
06A | Rc3/4 (20A) |
08A | Rc1 (25A) |
10A | Rc1-1/4 (32A) |
12A | Rc1-1/2 (40A) |
Code | Companion flange |
- | n/a |
N | Attached |
*1 For fluids other than the above fluids. Please ask us for details.
*2 20U and 40U are not available for water glycol oil.
Filter Model example:TRF-08A-10U-V
Element Model example:P-TRF-08A-10U
Seals Model example:SA-TRF-08A
■ Model code of replacement element consists of two types: ”Individual code” and "Common code", however it represents same product.
”Individual code” :Used in drawings and nameplate.
Model example:P-TRF-08A-10U
"Common code" :Used in vouchers and tag.
Model example:P-TRF,TRA,TLA-06,08-10U
+81-3-6912-9922+81-3-6912-9922
Excluding Saturdays, Sundays and Holidays