Oil Filters List
GC
| Type | Manifold type filter |
|---|---|
| Application | A line filter type mounted directly on top of the hydraulic manifold block. |
| Features |
・Choose from 4 types of element lengths. ・Clogging indicator direction is installed on the left or right sides. ・Equipped with drain plug. ・Element common to SH, 4201 type filters. |
Download
Specifiations
| Item | Standard Spec. | Option |
|---|---|---|
| Corresponding fluid | Mineral oil | Phosphate ester oil, water glycol oil |
| Maximum working pressure | 0-35MPa | - |
| Indicator | n/a | Select from visual type, electric contact type, and electric contact type (micro capacity) |
| Relief valve (Bypass) | n/a | Installation optional |
| Connection | Manifold type | - |
| - |
ItemsModel
Fluid type*1
| Code | Fluid type |
| - | Mineral oil |
| F | Phosphate ester oil |
| G | Water glycol oil |
GC
Inner diameter
| Code | Inner diameter |
| 12Z | 40Aequivalent |
Case length
| Code |
| 3 |
| 4 |
| 5 |
| 6 |
Filtration
| Code | Filtration |
| C-Fiber | |
| 3C | 3μm |
| 8C | 8μm |
| 25C | 25μm |
| C-Fiber (High pressure) | |
| 3CH | 3μm |
| 8CH | 8μm |
| 25CH | 25μm |
| Paper | |
| 10U | 10μm |
| 20U*2 | 20μm |
| 40U*2 | 40μm |
| Wire gauze | |
| 5UW | 5μm |
| 10UW | 10μm |
| 20UW | 20μm |
| 40UW | 40μm |
| 50UW | 50μm |
| 200W | 200mesh |
| 150W | 150mesh |
| 100W | 100mesh |
| 60W | 60mesh |
Option(1)(2)(3)
| (1) | Indicator |
| - | Plug |
| RI | Visual type |
| LI | |
| RE | Electric contact type |
| LE | |
| RD | Electric contact type (micro capacity) |
| LD | |
| (2) | Relief valve (Bypass) *3 |
| V | Attached |
| K | n/a |
| (3) | Knock pin |
| - | n/a |
| P | Attached |
P
Fluid type*1
| Code | Fluid type |
| - | Mineral oil |
| F | Phosphate ester oil |
| G | Water glycol oil |
GC
Case length
| Code |
| 3 |
| 4 |
| 5 |
| 6 |
Filtration
| Code | Filtration |
| C-Fiber | |
| 3C | 3μm |
| 8C | 8μm |
| 25C | 25μm |
| C-Fiber (High pressure) | |
| 3CH | 3μm |
| 8CH | 8μm |
| 25CH | 25μm |
| Paper | |
| 10U | 10μm |
| 20U*2 | 20μm |
| 40U*2 | 40μm |
| Wire gauze | |
| 5UW | 5μm |
| 10UW | 10μm |
| 20UW | 20μm |
| 40UW | 40μm |
| 50UW | 50μm |
| 200W | 200mesh |
| 150W | 150mesh |
| 100W | 100mesh |
| 60W | 60mesh |
Set type
| Code | Sealing parts set |
| SP |
For element replacement |
| SA | For overhaul |
Fluid type*1
| Code | Fluid type |
| - | Mineral oil |
| F | Phosphate ester oil |
| G | Water glycol oil |
GC
Inner diameter
| Code | Inner diameter |
| 12Z | 40Aequivalent |
Element type
| Code | Filtation rati |
| - | All mdels except bellow |
| H | 3CH, 8CH, 25CH |
| UW | 5UW, 10UW, 20UW |
*1 For fluids other than the above fluids. Please ask us for details.
*2 20U and 40U are not available for water glycol oil.
*3 Relief valve is not available if selecting high pressure element.
Filter Model example：F-GC-12Z-5-3C-REV
Element Model example：P-F-GC-5-3C
Seals Model example：SA-F-GC-12Z
■ Model code of replacement element consists of two types: ”Individual code” and "Common code", however it represents same product.
”Individual code” :Used in drawings and nameplate.
Model example：P-F-GC-5-3C
"Common code" :Used in vouchers and tag.
Model example：P-F-GC,SH,4201-5-3C
Contact
-
TEL
+81-3-6912-9922+81-3-6912-9922
Excluding Saturdays, Sundays and Holidays -
Inquiry & Request