GM
Manifold type filter
A line filter type mounted directly on top of the hydraulic manifold block.
- Choose from 2 types of element lengths.
- Reverse flow valve attachment option
- Equipped with drain plug
- Element common to TM type filters
Specifications
| Items | ||
| Standard specifications | Possible corresponding specifications / options, etc. | |
| Corresponding fluid | Mineral oil | Phosphate ester oil, water glycol oil |
| Maximum working pressure | 0～21MPa | - |
| Indicator | n/a | Select from visual type, electric contact type, and electric contact type (micro capacity) |
| Relief valve (Bypass) | n/a | Installation optional |
| Connection | Manifold type | - |
| Magnet | - | - |
Model
- Model number
- Element
- Seals
Model example：F-GM-04Z-2-3C-IV |
| Code | Fluid type |
| - | Mineral oil |
| F | Phosphate ester oil |
| G | Water glycol oil |
| Code | Inner diameter |
| 04Z | 15A equivalent |
| Code |
| 2 |
| 3 |
| Code | Filtration |
| Micro-glass element | |
| 3C | 3μm |
| 3CH | 3μm (High pressure) |
| 8C | 8μm |
| 8CH | 8μm (High pressure) |
| 25C | 25μm |
| Cellulose | |
| 10U | 10μm |
| 20U*3 | 20μm |
| 40U*3 | 40μm |
| Strainer(SUS) | |
| 5UW | 5μm |
| 10UW | 10μm |
| 20UW | 20μm |
| 40UW | 40μm |
| 50UW | 50μm |
| 200W | 200Mesh |
| 150W | 150Mesh |
| 100W | 100Mesh |
| 60W | 60Mesh |
| (1) | Indicator |
| - | Plug |
| I | Visual type |
| E | Electric contact type |
| D | electric contact type (micro capacity) |
| (2) | Relief valve (Bypass) *4 |
| V | Attached |
| K | n/a |
| (3) | Reverse flow valve |
| - | n/a |
| D | Attached |
| (4) | Knock pin |
| - | n/a |
| P | Attached |
| *1 | For fluids other than the above fluids. |
| *2 | For general oil-based fluid specifications and water glycol oil specifications, the filtering material and design may be differ even with the same filtration accuracy. |
| *3 | 20U and 40U unsuitable for water-glycol based oils |
| *4 | No relief valve for high pressure elements. |
Model example：P-F-GM-2-3C |
Elements
| Code | Fluid type |
| - | Mineral oil |
| F | Phosphate ester oil |
| G | Water glycol oil |
| Code |
| 2 |
| 3 |
| Code | Filtration |
| Micro-glass element | |
| 3C | 3μm |
| 3CH | 3μm (High pressure) |
| 8C | 8μm |
| 8CH | 8μm (High pressure) |
| 25C | 25μm |
| Cellulose | |
| 10U | 10μm |
| 20U*3 | 20μm |
| 40U*3 | 40μm |
| Strainer(SUS) | |
| 5UW | 5μm |
| 10UW | 10μm |
| 20UW | 20μm |
| 40UW | 40μm |
| 50UW | 50μm |
| 200W | 200Mesh |
| 150W | 150Mesh |
| 100W | 100Mesh |
| 60W | 60Mesh |
| *1 | For fluids other than the above fluids. |
| *2 | For general oil-based fluid specifications and water glycol oil specifications, the filtering material and design may be differ even with the same filtration accuracy. |
| *3 | 20U and 40U unsuitable for water-glycol based oils |
Model example：SA-F-GM-04Z-D |
| Code | Fluid type |
| - | Mineral oil |
| F | Phosphate ester oil |
| G | Water glycol oil |
| Code | Inner diameter |
| 04Z | 15A equivalent |
| (3) | Reverse flow valve |
| - | n/a |
| D | Attached |
| *1 | For fluids other than the above fluids. |
| *2 | For overhaul : all packings and o-rings used in oil filter housing |
