GC

Manifold type filter

Application

A line filter type mounted directly on top of the hydraulic manifold block.

Features

  • Choose from 4 types of element lengths
  • Indicator signal direction is installed on the left and right sides
  • Equipped with drain plug
  • Element common to SH type filters
  • PDF Drawing
  • CAD Drawing
  • Catalogue
  • Instruction manual

Specifications

Items  
Standard specifications Possible corresponding specifications / options, etc.
Corresponding fluid Mineral oil Phosphate ester oil, water glycol oil
Maximum working pressure 0`35MPa -
Indicator n/a Select from visual type, electric contact type, and electric contact type (micro capacity)
Relief valve (Bypass) n/a Installation optional
Connection Manifold type -
Magnet - -

Model

  • Model number
  • Element
  • Seals

Model exampleFF-GC-12Z-5-3C-REV

 

Code Fluid type
- Mineral oil
F Phosphate ester oil
G Water glycol oil
 
Code Inner diameter
12Z 40A
equivalent
 
Code
3
4
5
6
 
Code Filtration
Micro-glass element
3C 3m
3CH 3m (High pressure)
8C 8m
8CH 8m (High pressure)
25C 25m
Cellulose
10U 10m
20U*3 20m
40U*3 40m
Strainer(SUS)
5UW 5m
10UW 10m
20UW 20m
40UW 40m
50UW 50m
200W 200Mesh
150W 150Mesh
100W 100Mesh
60W 60Mesh
 
(1) Indicator
    installation position
- Plug  
RI Visual type Right side when viewed from inlet port
LI Left side when viewed from inlet port
RE Electric contact type Right side when viewed from inlet port
LE Left side when viewed from inlet port
RD Electric contact type (micro capacity) Right side when viewed from inlet port
LD Left side when viewed from inlet port
(2) Relief valve (Bypass) *4
V Attached
K n/a
(3) Knock pin
- n/a
P Attached
*1 For fluids other than the above fluids.
*2 For general oil-based fluid specifications and water glycol oil specifications, the filtering material and design may be differ even with the same filtration accuracy.
*3 20U and 40U unsuitable for water-glycol based oils
*4 No relief valve for high pressure elements.

Model exampleFP-F-GC-5-3C

Code Fluid type
- Mineral oil
F Phosphate ester oil
G Water glycol oil
 
 
Code
3
4
5
6
 
Code Filtration
Micro-glass element
3C 3m
3CH 3m (High pressure)
8C 8m
8CH 8m (High pressure)
25C 25m
Cellulose
10U 10m
20U*3 20m
40U*3 40m
Strainer(SUS)
5UW 5m
10UW 10m
20UW 20m
40UW 40m
50UW 50m
200W 200Mesh
150W 150Mesh
100W 100Mesh
60W 60Mesh
*1 For fluids other than the above fluids.
*2 For general oil-based fluid specifications and water glycol oil specifications, the filtering material and design may be differ even with the same filtration accuracy.
*3 20U and 40U unsuitable for water-glycol based oils

Model exampleFSA-F-GC-12Z

 

Code Fluid type
- Mineral oil
F Phosphate ester oil
G Water glycol oil
 
Code
12Z
*1 For fluids other than the above fluids.
*2 For overhaul : all packings and o-rings used in oil filter housing