4201
Manifold type filter
A line filter type mounted directly on top of the hydraulic manifold block.
- Choose from 3 types of element lengths for all inner diameters
- Indicator signal direction is installed on the left and right sides
- Equipped with drain plug
- Element common to SH type filters
Specifications
| Items | ||
| Standard specifications | Possible corresponding specifications / options, etc. | |
| Corresponding fluid | Mineral oil | Phosphate ester oil, water glycol oil |
| Maximum working pressure | 0～42MPa | - |
| Indicator | n/a | Select from visual type, electric contact type, and electric contact type (micro capacity) |
| Relief valve (Bypass) | n/a | Installation optional |
| Connection | Manifold type | - |
| Magnet | - | - |
Model
- Model number
- Element
- Seals
Model example：F-4201-12-4-3C-REV |
| Code | Fluid type |
| - | Mineral oil |
| F | Phosphate ester oil |
| G | Water glycol oil |
| Code | Inner diameter |
| 12Z | 40A equivalent |
| Code |
| 4 |
| 5 |
| 6 |
| Code | Filtration |
| Micro-glass element | |
| 3C | 3μm |
| 3CH | 3μm (High pressure) |
| 8C | 8μm |
| 8CH | 8μm (High pressure) |
| 25C | 25μm |
| Cellulose | |
| 10U | 10μm |
| 20U*3 | 20μm |
| 40U*3 | 40μm |
| (1) | Indicator | |
| installation position | ||
| - | Plug | |
| RI | Visual type | Right side when viewed from inlet port |
| LI | Left side when viewed from inlet port | |
| RE | Electric contact type | Right side when viewed from inlet port |
| LE | Left side when viewed from inlet port | |
| RD | Electric contact type (micro capacity) | Right side when viewed from inlet port |
| LD | Left side when viewed from inlet port | |
| (2) | Relief valve (Bypass) *4 | |
| V | Attached | |
| K | n/a | |
| *1 | For fluids other than the above fluids. |
| *2 | For general oil-based fluid specifications and water glycol oil specifications, the filtering material and design may be differ even with the same filtration accuracy. |
| *3 | 20U and 40U unsuitable for water-glycol based oils |
| *4 | No relief valve for high pressure elements. |
Model example：P-F-4201-4-3C |
Elements
| Code | Fluid type |
| - | Mineral oil |
| F | Phosphate ester oil |
| G | Water glycol oil |
| Code |
| 4 |
| 5 |
| 6 |
| Code | Filtration |
| Micro-glass element | |
| 3C | 3μm |
| 3CH | 3μm (High pressure) |
| 8C | 8μm |
| 8CH | 8μm (High pressure) |
| 25C | 25μm |
| Cellulose | |
| 10U | 10μm |
| 20U*3 | 20μm |
| 40U*3 | 40μm |
| *1 | For fluids other than the above fluids. |
| *2 | For general oil-based fluid specifications and water glycol oil specifications, the filtering material and design may be differ even with the same filtration accuracy. |
| *3 | 20U and 40U unsuitable for water-glycol based oils |
Model example：SA-F-4201-12Z |
| Code | Fluid type |
| - | Mineral oil |
| F | Phosphate ester oil |
| G | Water glycol oil |
| Code | Inner diameter |
| 12Z | 40A equivalent |
| *1 | For fluids other than the above fluids. |
| *2 | For overhaul : all packings and o-rings used in oil filter housing |
