COS-H
Duplex filter
A duplex filter best suited for situations where operation cannot be suspended. It is suitable for line filters.
- Welded design duplex filter
- Element can be replaced without stopping operations.
Specifications
| Items | ||
| Standard specifications | Possible corresponding specifications / options, etc. | |
| Corresponding fluid | Mineral oil | - |
| Maximum working pressure | 0～2MPa | - |
| Indicator | n/a | Select from visual type, electric contact type, and electric contact type (micro capacity) |
| Relief valve (Bypass) | - | - |
| Connection | JIS 10K SOP, FF (Companion flange attached) | Can select JIS, ANSI, JPI flange ratings other than those listed to the left *1 |
| Magnet | n/a | Installation optional |
| *1：Setting for inner diameter codes 06(20A)、10(32A)、16(50A)、24(80A)、32(100A) only. Also, companion flange not attached. | ||
Model
- Model number
- Element
- Seals
Model example：COS-H-16-B-150K-CEM |
| Code | Inner diameter |
| 04 | 15A |
| 06 | 20A |
| 08 | 25A |
| 10 | 32A |
| 12 | 40A |
| 16 | 50A |
| 20 | 65A |
| 24 | 80A |
| 28 | 90A |
| 32 | 100A |
| Code | Direction |
| A | Inside to outside ( Cellulose element, Wire mesh element) |
| B | Outside to inside (Notch wire element) |
| Code | Filtration |
| Micro-glass element | |
| 8C | 8μm |
| 25C | 25μm |
| Cellulose | |
| 10U | 10μm |
| 20U | 20μm |
| 40U | 40μm |
| SUS Mesh | |
| 5UW | 5μm |
| 10UW | 10μm |
| 20UW | 20μm |
| 40UW | 40μm |
| 50UW | 50μm |
| 200W | 200Mesh |
| 150W | 150Mesh |
| 100W | 100Mesh |
| 60W | 60Mesh |
| Notch wire | |
| 50UK | 50μm |
| 200K | 200Mesh |
| 150K | 150Mesh |
| 100K | 100Mesh |
| 60K | 60Mesh |
| (1) | Change-over handle |
| - | Front handle |
| R | Front handle |
| (2) | Flange ratings |
| - | JIS20K SOP,FF(SS400) |
| A | ANSI150LB SO,RF(A105) |
| B | ANSI300LB SO,RF(SFVC2A) |
| C | JPI150LB SO,RF(A105) |
| E | JPI300LB SO,RF(SFVC2A) |
| F | JIS20K SOH,RF(S25C) |
| (3) | Indicator |
| - | Blind plug |
| I | Visual type |
| E | electric contact type |
| D | electric contact type (micro capacity) |
| (4) | Magnet |
| - | n/a |
| M | Attached |
Model example：P-COS-H-06-A-10U |
Elements
| Code | Inner diameter |
| 04 | 15A |
| 06 | 20A |
| 08 | 25A |
| 10 | 32A |
| 12 | 40A |
| 16 | 50A |
| 20 | 65A |
| 24 | 80A |
| 28 | 90A |
| 32 | 100A |
| Code | Direction |
| A | Inside to outside ( Cellulose element, Wire mesh element) |
| B | Outside to inside (Notch wire element) |
| Code | Filtration |
| Micro-glass element | |
| 8C | 8μm |
| 25C | 25μm |
| Cellulose | |
| 10U | 10μm |
| 20U | 20μm |
| 40U | 40μm |
| SUS Mesh | |
| 5UW | 5μm |
| 10UW | 10μm |
| 20UW | 20μm |
| 40UW | 40μm |
| 50UW | 50μm |
| 200W | 200Mesh |
| 150W | 150Mesh |
| 100W | 100Mesh |
| 60W | 60Mesh |
| Notch wire | |
| 50UK | 50μm |
| 200K | 200Mesh |
| 150K | 150Mesh |
| 100K | 100Mesh |
| 60K | 60Mesh |
Model example：SA-COS-H-06-A-I |
| Code | Inner diameter |
| 04 | 15A |
| 06 | 20A |
| 08 | 25A |
| 10 | 32A |
| 12 | 40A |
| 16 | 50A |
| 20 | 65A |
| 24 | 80A |
| 28 | 90A |
| 32 | 100A |
| Code | Direction |
| A | Inside to outside ( Cellulose element, Wire mesh element) |
| B | Outside to inside (Notch wire element) |
| (3) | Indicator |
| - | Plug |
| I | Visual type |
| E | Electric contact type |
| D | electric contact type (micro capacity) |
| * | Seal set for Switchable Filters is only for one side of the two pipes |
